Video Intercom System with Keypad, Card Reader – System Builder

You always require 1 monitor and may have up to 10 in one system. Use this selector to choose the type and quantity of the required monitor. You can add different monitors types below in the next 2 steps to create a mixed monitor system.

Allow for different types of monitor on same system. Use this to choose a different monitor from the one chosen above to create a mixed monitor system.

Allows for 3 different types of monitor on same system.

You must have at least 1 door station mount and should have the same amount of mounts as the quantity of door stations. If you have multiple door stations and you require flush and surface mounts, use the next selector to add the different type and quantity.

Use this selector where you have multiple door stations and different mount types. This selector should be used for a different mount type to the selector above e.g. If the selected mount above is surface mount, this one should be flush mount.

Each door station can unlock 1 door. Add this device to expand each door station to unlock 2 doors.

Door station and monitors are best powered using Power over Ethernet (PoE). Each monitor and door station uses a single port on the PoE switch. Choose a PoE switch with enough ports (or a combination of PoE switches) to ensure all devices are connected and powered.

RFID Cards / Fobs allow a user to unlock the door / gate by holding the RFID Card / Fob against the reader panel on the door station. The RFID Card / Fob must be registered with the system to work. Note that with multiple door stations each RFID Card / Fob can open all doors on the system. The same applies to PIN Codes. If you want to have each door station independant with PIN Codes and RFID Cards / Fobs you must use an apartment intercom system.