Akuvox SIP 7″ 2-Wire touch video intercom monitor with WiFi- C313W-2

The Akuvox C313W-2 is a low cost 7″ Linux based touch screen monitor for use with Akuvox SIP video intercom door stations over 2-wire.  It is designed for replacing old intercom systems in homes and apartments.

You can view IP cameras and the door station from the touch interface.  Call other intercom monitors for a room to room voice intercom system. Powered by 48VDC external power or through NS-2 switch for an easy installation.  Connect with WiFi or through standard ethernet port or via 2-wire.

The C313W-2 multifunctional communicator, which works as an indoor monitor, provides audio and video communication with Door phones via SIP 2.0 protocol. It delivers the ultimate touch screen experience in an unobtrusive, space-saving design featuring a brilliant 7-inch capacitive touch screen display.  It also has an energy saving mode

At a Glance:

Touch Screen Display
Display Type: Active matrix TFT, transmissive type
Size: 7 inch (176 mm) diagonal
Aspect Ratio: 16:9
Resolution: 800×480
Luminance: 220 (cd/m²)
Contrast: 500:1
Viewing Angle: ±50° horizontal , 40° upper, 50° lower
Touch Screen: Projected Capacitive

Video
Streaming Formats: H.264

Audio
Features: Built-in microphone and speaker

Memory
RAM: 64MB
Flash: 128MB

Interface
Ethernet: 1 x 10/100 Mbps ports adaptive
2-wire ports: 2 pair
Wi-Fi: IEEE802.11 b/g/n, @2.4GHz
Relay Out: 1x relay out (NO/COM/NC)
Bell In: 1x bell input terminal
RS485: 1x RS485 communication port

Environmental
Temperature: -10° to 45°C
Humidity: 10% to 90% (non-condensing)

Mechanical parameters
Dimensions (W x H x D): 200.2  x 132.2  x 27.2 mm

Application Scenario